User guide

Bridge command reference BRIDGE
2-81
iMG/RG Software Reference Manual (Switching)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge show interface bridge1 trafficclassmap
Bridge Interface: bridge1
Number of Traffic Classes: 8
--------------------------
Regenerated| Traffic
Priority | Class
-----------|--------------
0 | 0
1 | 1
2 | 2
3 | 3
4 | 4
5 | 5
6 | 6
7 | 7
See also BRIDGE SET INTERFACE ACCEPTFRAMETYPE
BRIDGE SET INTERFACE DEFAULTUSERPRIORITY
BRIDGE SET INTERFACE NUMTRAFFICCLASSES
BRIDGE SET INTERFACE REGENPRIORITY
BRIDGE LIST INTERFACES
2.3.4.1.55 BRIDGE SHOW INTERFACESTATS
Syntax BRIDGE SHOW INTERFACESTATS { < name > | < number > }
Description This command displays the statistical information of one bridge interface configured by
the user.
• Rx Frames: Number of frames received on the interface.
• Tx Frames: Number of frames transmitted from the interface.
Name Description Default Value
Name A name that identifies an existing bridge interface. To dis-
play interface names, use the bridge list interfaces com-
mand.
N/A
Number A number that identifies an existing bridge interface. To
display interface names, use the bridge list interfaces com-
mand. The number appears in the first column under the
heading ID.
N/A