User guide

BRIDGE Bridge command reference
iMG/RG Software Reference Manual (Switching)
2-80
• User Priority: It is the priority that comes in the VLAN tagged or priority tagged
incoming packets as per the 802.1p
.
• Regenerated priority:
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge show interface bridge1 regenpriority
Bridge Interface: bridge1
--------------------------
User | Regenerated
Priority | Priority
-----------|--------------
0 | 0
1 | 1
2 | 2
3 | 3
4 | 4
5 | 5
6 | 6
7 | 7
See also BRIDGE LIST INTERFACES
BRIDGE ATTACH
2.3.4.1.54 BRIDGE SHOW INTERFACE TRAFFICCLASSMAP
Syntax BRIDGE SHOW INTERFACE {< name >|< number >} TRAFFICCLASSMAP
Description This command displays the regenerated priority to traffic class mapping. It also displays
the number of traffic classes supported by the interface.
Name Description Default Value
Name A name that identifies an existing bridge interface. To dis-
play interface names, use the bridge list interfaces com-
mand.
N/A
Number A number that identifies an existing bridge interface. To
display interface names, use the bridge list interfaces com-
mand. The number appears in the first column under the
heading ID.
N/A