User guide

Bridge command reference BRIDGE
2-77
iMG/RG Software Reference Manual (Switching)
See also BRIDGE SET INTERFACE NUMTRAFFICCLASSES
BRIDGE SET INTERFACE TRAFFICCLASSMAP
BRIDGE SET INTERFACE REGENPRIORITY
2.3.4.1.48 BRIDGE SET LANTOLANFORWARDING
Syntax BRIDGE SET LANTOLANFORWARDING ENABLE/DISABLE
Description This command is used to enable/disable LAN to LAN forwarding (where data received on
a LANside bridge interface is forwarded to other LAN-side bridge interface.).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge set lantolanforwarding enable
See also BRIDGE SET WANTOWANFORWARDING ENABLE/DISABLE
2.3.4.1.49 BRIDGE SET WANTOWANFORWARDING
Syntax BRIDGE SET WANTOWANFORWARDING ENABLE/DISABLE
Description This command is used to enable/disable WAN to WAN forwarding (where data received
on a WANside bridge interface is forwarded to other WAN-side bridge interface.)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge set wantowanforwarding enable
See also BRIDGE SET LANTOLANFORWARDING ENABLE/DISABLE
2.3.4.1.50 BRIDGE SHOW
Syntax BRIDGE SHOW
Name Description Default Value
Enable Enables LAN to LAN forwarding on the bridge. N/A
Disable Disables LAN to LAN forwarding on the bridge. N/A
Name Description Default Value
Enable Enables WAN to WANforwarding on the bridge. N/A
Disable Disables WAN to WAN forwarding on the bridge. N/A