User guide

Bridge command reference BRIDGE
2-75
iMG/RG Software Reference Manual (Switching)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge set interface bridge1 pvid 2
See also BRIDGE LIST INTERFACES
BRIDGE ADD VLAN
2.3.4.1.46 BRIDGE SET INTERFACE REGENPRIORITY
Syntax BRIDGE SET INTERFACE {<name>|<number>} REGENPRIORITY <pri0>
<pri1> <pri2> <pri3> <pri4> <pri5> <pri6> <pri7>
Description This command adds a named interface to the bridge.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Name Description Default Value
Name An arbitrary name that identifies an object. It can be made up
of one or more letters or a combination of letters and digits,
but it cannot start with a digit.
N/A
Number A number that identifies an existing bridge interface. To dis-
play interface names, use the bridge list interfaces command.
The number appears in the first column under the heading
ID.
N/A
Pvid The Id of the VLAN to which the user wants to associate the
untagged/priority-tagged frames received on the given inter-
face. See bridge list vlans CLI command to find the VLAN Ids
for all the statically configured and dynamic VLANs.
1
Name Description Default Value
Name A name that identifies an existing bridge interface. To display
interface names, use the bridge list interfaces command.
N/A
Number A number that identifies an existing bridge interface. To dis-
play interface names, use the bridge list interfaces command.
The number appears in the first column under the heading
ID.
N/A
pri0 The regenerated user-priority to which the user priority with
value 0 in the incoming frame should be mapped.
0