User guide

Bridge command reference BRIDGE
2-71
iMG/RG Software Reference Manual (Switching)
2.3.4.1.40 BRIDGE SET INTERFACE DEFAULTUSERPRIORITY
Syntax BRIDGE SET INTERFACE {<name>|<number>} DEFAULTUSERPRIORITY
<defaultpriority>
Description This command specifies the user priority that should be assigned to untagged frames,
received on the interface.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge set interface bridge1 defaultuserpriority 4
See also BRIDGE LIST INTERFACES
2.3.4.1.41 BRIDGE SET INTERFACE FILTETYPE
Syntax BRIDGE SET INTERFACE {<name> | <number>} FILTERTYPE {all | ip
| pppoe}
Description This command specifies the type of Ethernet filtering performed by the named bridge
interface.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Name Description Default Value
Name An arbitrary name that identifies an object. It can be
made up of one or more letters or a combination of
letters and digits, but it cannot start with a digit.
N/A
Number Number that identifies an existing bridge interface. To
display interface names, use the bridge list interfaces
command. The number appears in the first column
under the heading ID.
N/A
Defaultpriority A value that assigns priority to untagged frames
received on the interface.
0
Name Description Default Value
Name The name manually assigned to the object when it was
created..
N/A
Number The numerical identifier automatically assigned to the
object when it was created.
N/A
All Allows all types of ethernet packets through the port. All