User guide

BRIDGE Bridge command reference
iMG/RG Software Reference Manual (Switching)
2-70
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge set filterage 1000
See also BRIDGE SHOW
2.3.4.1.39 BRIDGE SET INTERFACE ACCEPTFRAMETYPE
Syntax BRIDGE SET INTERFACE { <name>|number } ACCEPTFRAMETYPE {
acceptall | accepttaggedonly }
Description This command specifies whether the bridge interface accepts only VLAN tagged frames
or it accepts all the incoming frames. If the interface accepts all incoming frames, it
assigns its PVID to the untagged or priority tagged frames.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge set interface bridge1 acceptframetype acceptall
See also BRIDGE SET INTERFACE PVID
BRIDGE LIST INTERFACES
Name Description Default Value
Filterage The time (in seconds) after which MAC addresses are
removed from the filter table when there has been no
activity. The time may be an integer value between 10
and 100,000 seconds..
300
Name Description Default Value
Name A name that identifies an existing bridge interface. To
display interface names, use the bridge list interfaces
command.
N/A
Number A number that identifies an existing bridge interface.
To display interface names, use the bridge list inter-
faces command. The number appears in the first col-
umn under the heading ID.
N/A
Acceptall Accepts all the incoming frames. Acceptall
accepttaggedonly Accepts only VLAN tagged frames. See the bridge
show interfacestats command. to know the incoming
frames discarded due to acceptable frame type filtering