User guide

Bridge command reference BRIDGE

2-69

iMG/RG Software Reference Manual (Switching)

• ID: The numerical identifier automatically assigned to the object when it was created.

• Type: One of the following types:

• source MAC address-based

• destination MAC address-based, statically configured

• destination MAC address-based, dynamically learnt

• Special Entry

• destination MAC address-based, statically configured and dynamically learnt.

• MAC Address: Ethernet MAC address associated with the entry.

• Receive Port: Receive port for source MAC address-based entries. See the bridge

add ucastentry src CLI command for more information.

• Egress Interface: Egress interface list..

Options The following table gives the range of values for each option that can be specified with

this command and a default value (if applicable).

Example --> bridge list ucastentries bridge1

Filtering entries for the FDB: FDB_1

ID| Type | MAC Address | Receive Port

--------------------------------------------------------

1| Dest Static| 0:0:0:0:0:0 |

Egress Interfaces: bridge1

---------------------------------------------------------