User guide

BRIDGE Bridge command reference
iMG/RG Software Reference Manual (Switching)
2-68
Description This command displays information about the statically configured unicast forwarding
entries for the named Forwarding Database. The fields are listed below:
• IDA number that identifies an existing unicast forwarding entry.
• NameA name that identifies an existing unicast forwarding entry.
• TypeIndicates whether the entry is a source MAC address or destination MAC
address based forwarding entry.
• MAC AddressEthernet MAC address associated with the entry.
• Receive PortReceive interface for source MAC address based entries. See the bridge
add ucastentry src for more information.
• Egress InterfacesEgress interface list.
Options
T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example bridge list static ucastentries DefaultFdb
.ID. | .Name........|.Type...........|.MAC Address...........| .Receive Port
---------------------------------------------------------------------
..1..|.x
............| .Dest Static. |.00:00:00:00:00:00...|
Egress Interfaces: bridge1
.........................................................
See also BRIDGE ADD UCASTENTRY SRC
BRIDGE ADD UCASTENTRY DEST
BRIDGE LIST UCASTENTRIES
2.3.4.1.37 BRIDGE LIST UCASTENTRIES
Syntax BRIDGE LIST UCASTENTRIES <fdbname>
Description This command displays all of the statically configured and dynamically learnt unicast filter-
ing entries in the named filtering database.
Name Description Default Value
fdbname The name of an existing forwarding database to which the
entry will be added.
fdbn umber A number that identifies an existing Forwarding Database.
To display the list of FDBs, use the
bridge list fdbs com-
mand. The number appears in the first column under the
heading ID.