User guide

BRIDGE Bridge command reference
iMG/RG Software Reference Manual (Switching)
2-62
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge flush bridge1
See also BRIDGE ADD INTERFACE
BRIDGE ATTACH
BRIDGE LIST INTERFACE STATS
2.3.4.1.27 BRIDGE LIST FDBS
Syntax BRIDGE LIST FDBS
Description This command displays statistical information of all the filtering databases in the bridge. It
displays the following information about the filtering database:
• Filtering database ID (FID)
• Number of dynamic unicast entries within it
• Number of VLANs associated with it
• Number of frames discarded due to filtering database overflow
• Type, indicating whether the filtering database is statically configured or dynamically
created (by default, FDBs are created statically using the bridge add vlan command)
See also BRIDGE ADD VLAN
2.3.4.1.28 BRIDGE LIST FWDALL SHARED
Syntax BRIDGE LIST FWDALL SHARED {<fdbname>|<fdbnumber>}
Description This command lists the statically added interfaces (See bridge add fwdallinterface shared CLI com-
mand) and dynamically learnt interfaces in the egress interface list of the Forward All Group for
the named Forwarding Database. The Forward All Group represents the set of interfaces to
which all the multicast frames would be forwarded.
Options
T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable)
Name Description Default Value
Portname The name of a bridge interface that has previously been
added and attached to a transport using the bridge add
interface and bridge attach CLI commands respectively.
N/A