User guide

BRIDGE Bridge command reference
iMG/RG Software Reference Manual (Switching)
2-58
egress interface list of the entry (previously added using the bridge add mcastinterface
shared
CLI command).
Options
T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable)bridge list mcastentries shared
Example bridge delete mcastentry shared MCAST_1 DefaultFDB
See also BRIDGE CLEAR MCASTENTRIES SHARED
BRIDGE DELETE MCASTENTRY SHARED
2.3.4.1.22 BRIDGE DELETE MCASTINTERFACE SHARED
Syntax BRIDGE DELETE MCASTINTERFACE SHARED {<entryname>| <entrynum-
ber>) {<fdbname>| <fdbnumber>) <interfacename>
Description This command removes an interface from the egress interface list of a multicast For-
warding entry.
Options
T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable)
Name Description Default Value
entryname Name of an existing Multicast Forwarding Entry. To dis-
play the list of all statically configured multicast entries,
that the user can delete, use
bridge list static mcasten-
tries. This command also displays the entire egress interface
list for that entry.
entrynumber A number that identifies an existing Multicast Forwarding
Entry. To display the list of statically configured multicast
entries, use bridge list static mcastentries. The number
appears in the first column under the heading ID.
fdbname The name of an existing Forwarding Database. See
bridge add
vlan CLI command to configure a new Filtering Database.
fdbnumber A number that identifies an existing Forwarding Database.
To display the list of FDBs, use the
bridge list fdbs com-
mand. The number appears in the first column under the
heading ID.