User guide

Bridge command reference BRIDGE
2-57
iMG/RG Software Reference Manual (Switching)
Syntax bridge delete fwdunreginterface shared FDB_1 bridge1
See also BRIDGE ADD FWDALLINTERFACE
BRIDGE LIST FWDALL SHARED
2.3.4.1.20 BRIDGE DELETE INTERFACE
Syntax BRIDGE DELETE INTERFACE < name | number >
Description This command deletes a single interface from the bridge.
All source/ destination MAC address based unicast filtering entries associated with the
interfaces are also deleted by this command. The interface is also deleted from the egress
interface list of all VLANs, multicast filtering entries and Forward All/Unregistered group
entries.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge delete interface qbridge1
See also BRIDGE LIST INTERFACES
2.3.4.1.21 BRIDGE DELETE MCASTENTRY SHARED
Syntax
BRIDGE DELETE MCASTENTRY SHARED {<entryname>| <entrynumber>)
{<fdbname> | <fdbnumber>)
Description This command deletes a single multicast forwarding entry created using the bridge add
mcastentry shared
CLI command. Also, this command deletes all of the interfaces in the
fdbnumber A number that identifies an existing Forwarding Data-
base. To display the list of FDBs, use the
bridge list
fdbs
command. The number appears in the first col-
umn under the heading ID.
interface name The name of a bridge interface that has previously
been added and attached to a transport using the
bridge add interface and bridge attach CLI commands,
respectively.
Name Description Default Value
Name The name manually assigned to the object when it was
created.
N/A
Number The numerical identifier automatically assigned to the
object when it was created.
N/A