User guide

Bridge command reference BRIDGE
2-55
iMG/RG Software Reference Manual (Switching)
See also BRIDGE ADD UCASTENTRY SRC
BRIDGE ADD UCASTENTRY DEST
2.3.4.1.17 BRIDGE CLEAR UCASTINTERFACES
Syntax BRIDGE CLEAR UCASTINTERFACES {<entryname>| <entrynumber>)
{<fdbname>| <fdbnumber>)
Description This command removes all the interfaces from the egress interface list of the named uni-
cast forwarding entry.
Options
T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable)
Example bridge clear ucastinterfaces DefaultFdb
See also BRIDGE ADD UCASTENTRY SRC
BRIDGE ADD UCASTENTRY DEST
BRIDGE LIST UCASTENTRIES
2.3.4.1.18 BRIDGE DELETE FWDALLINTERFACE SHARED
Syntax
BRIDGE DELETE FWDALLINTERFACE SHARED {<fdbname>| <fdbnumber>}
<interfacename>
Description This command removes an interface from the egress interface list of the Forward All Group of
the named Forwarding Database (previously added using the bridge add fwdallinterface shared
Name Description Default Value
entryname Name of an existing unicast filtering entry. To display the
list of statically configured unicast entries, use
bridge list
static ucastentries.
entryn umber A number that identifies an existing unicast filtering entry. To
display the list of statically configured unicast entries, use
bridge list static ucastentries. The number appears in the
first column under the heading ID.
fdbname The name of an existing filtering database to which the fil-
tering entry will be added. See Note on filtering database
in this command.
fdbn umber A number that identifies an existing Filtering Database.
To display the list of FDBs, use the
bridge list fdbs com-
mand. The number appears in the first column under
the heading ID.