User guide

BRIDGE Bridge command reference
iMG/RG Software Reference Manual (Switching)
2-54
Example bridge clear mcastinterfaces shared MCAST_1 DefaultFDB
See also BRIDGE ADD MCASTENTRY SHARED
BRIDGE DELETE MCASTENTRY SHARED
2.3.4.1.16 BRIDGE CLEAR UCASTENTRIES
Syntax BRIDGE CLEAR UCASTENTRIES{<fdbname>| <fdbn umber>}
Description This commands deletes all the statically configured unicast forwarding entries in the
named forwarding database. For each unicast entry, it also deletes their egress interfaces.
Options
T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example bridge clear ucastentries DefaultFdb
Name Description Default Value
entryname Name of an existing Multicast Forwarding Entry. To dis-
play the list of all statically configured multicast entries,
that the user can delete, use
bridge list static mcasten-
tries. This command also displays the entire egress interface
list for that entry.
entrynumber A number that identifies an existing Multicast Forwarding
Entry. To display the list of statically configured multicast
entries, use
bridge list static mcastentries. The number
appears in the first column under the heading ID.
fdbname The name of an existing Forwarding Database. See
bridge add
vlan CLI command to configure a new Filtering Database.
fdbnumber A number that identifies an existing Forwarding Database.
To display the list of FDBs, use the
bridge list fdbs com-
mand. The number appears in the first column under the
Name Description Default Value
fdbname The name of an existing forwarding database to which
the entry will be added.
fdbn umber A number that identifies an existing Forwarding Data-
base. To display the list of FDBs, use the
bridge list
fdbs
command. The number appears in the first col-