User guide

BRIDGE Bridge command reference
iMG/RG Software Reference Manual (Switching)
2-52
Options T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable)
Example bridge clear fwdunreginterfaces shared FDB_1
See also BRIDGE ADD FWDALLINTERFACE
BRIDGE LIST FWDALL SHARED
2.3.4.1.12 BRIDGE CLEAR INTERFACE STATS
Syntax BRIDGE CLEAR INTERFACE STATS [ < name | number > ]
Description This command clears either the interface statistics for all interfaces or the interface sta-
tistics for a single specified interface. It resets all of the statistical information displayed by
bridge list interface stats CLI command to zero.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge clear interface stats
See also BRIDGE ADD INTERFACE
BRIDGE ATTACH
BRIDGE LIST INTERFACE STATS
2.3.4.1.13
BRIDGE CLEAR INTERFACES
Syntax BRIDGE CLEAR INTERFACES
Description This command deletes all bridge interfaces previously created using the bridge add inter-
face command.
All source/ destination MAC address based unicast forwarding entries associated with
the interfaces are also deleted by this command. The interfaces are also deleted from the
Name Description Default Value
fdbname The name of an existing Forwarding Database. See bridge add vlan
CLI command to configure a new Forwarding Database.
fdbnumber A number that identifies an existing Forwarding Database. To
display the list of FDBs, use the
bridge list fdbs command. The
number appears in the first column under the heading ID.
Name Description Default Value
Name The name manually assigned to the object when it was created. N/A