User guide

Bridge command reference BRIDGE
2-51
iMG/RG Software Reference Manual (Switching)
Example --> bridge attach bridge1 my1483
See also BRIDGE LIST INTERFACES
2.3.4.1.10 BRIDGE CLEAR FWDALLINTERFACES SHARED
Syntax BRIDGE CLEAR FWDALLINTERFACES SHARED {<fdbname> | <fdbnum-
ber>}
Description This commands removes all the interfaces from the egress interface list of the Forward All
Group of the named Forwarding Database. The Forward All Group represents the set of inter-
faces to which all the multicast frames would be forwarded.
Options
T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable)
Example
bridge clear fwdallinterfaces shared FDB_1
See also BRIDGE DELETE FWDALLINTERFACE SHARED
BRIDGE LIST FWDALL SHARED
2.3.4.1.11 BRIDGE CLEAR FWDUNREGINTERFACES SHARED
Syntax
BRIDGE CLEAR FWDUNREGINTERFACES SHARED { <fdbname> | <fdbnumber> }
Description This command removes all of the interfaces from the egress interface list of the Forward Unregis-
tered Group of the named Forwarding Database (previously added using the bridge add fwdun-
reginterface shared CLI command). The Forward Unregistered Group represents the set of interfaces
to which all the multicast frames would be forwarded, whose respective destination MAC addresses
have no other forwarding information available.
Transport A name that identifies an existing transport. To display trans-
port names, use the <transport type> list transports com-
mand.
N/A
Name Description Default Value
fdbname The name of an existing Forwarding Database. See bridge add
vlan CLI command to configure a new Forwarding Database.
fdbnumber A number that identifies an existing Forwarding Database. To
display the list of FDBs, use the
bridge list fdbs command. The
number appears in the first column under the heading ID.
Name Description Default Value