User guide

BRIDGE Bridge command reference
iMG/RG Software Reference Manual (Switching)
2-48
Example Example bridge add ucastentry dest UCAST_2 DefaultFdb 00:00:00:00:00:02
See also BRIDGE ADD UCASTENTRY SRC
BRIDGE ADD UCASTENTRY DEST
BRIDGE LIST UCASTENTRIES
2.3.4.1.7 BRIDGE ADD UCASTENTRY SRC
Syntax BRIDGE ADD UCASTENTRY SRC <name> {<fdbname>| <fdbn umber>)
<macaddress> <recvin terface>
Description This commands creates a source MAC address based unicast filtering entry in the named
filtering database.
When the system receives an ethernet frame, the system examines the source MAC address of
the frame. If both the source MAC address and source interface matches the <macaddress> and
<recvinterface> specified in this command, the system forwards the frame to the egress interfaces
configured for this entry. .
Options
T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Name Description Dafault Value
name An arbitrary name that identifies the entry. It can be made
up of one or more letters or a combination of letters and
digits, but it cannot start with a digit
The name has to be unique for all unicast entries (source
MAC and destination MAC based) in a Filtering Database.
fdbname The name of an existing forwarding database to which the
entry will be added.
fdbn umber A number that identifies an existing Forwarding Database.
To display the list of FDBs, use the
bridge list fdbs com-
mand. The number appears in the first column under the
heading ID.
macaddress A valid unicast Ethernet MAC address displayed in the follow-
ing format: ##:##:##:##:##:##