User guide

Bridge command reference BRIDGE
2-45
iMG/RG Software Reference Manual (Switching)
Example bridge add fwdunreginterface shared FDB_1 bridge1
See also BRIDGE ADD FWDALLINTERFACE
BRIDGE LIST FWDALL SHARED
2.3.4.1.3 BRIDGE ADD INTERFACE
Syntax BRIDGE ADD INTERFACE < name >
Description This command adds a named interface to the bridge.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge add interface bridge1
See also BRIDGE LIST INTERFACES
BRIDGE ATTACH
2.3.4.1.4 BRIDGE ADD MCASTENTRY SHARED
Syntax
BRIDGE ADD MCASTENTRY SHARED <name> { <fdbname> | <fdbnumber> } <mac>
Description This command adds a multicast forwarding entry to a Forwarding Database. On receiving
a multicast frame, if the multicast MAC address matches the address given in this com-
mand, that frame is forwarded to all the interfaces in the egress interface list of this entry.
See
bridge add mcastinterface shared to add an egress interface to a multicast
entry.
Options
T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable)
Option Description Default Value
Name An arbitrary name that identifies an object. It can be made
up of one or more letters or a combination of letters and
digits, but it cannot start with a digit..
N/A
Option Description Default Value
name An arbitrary name that identifies the entry. It can be
made up of one or more letters or a combination of let-
ters and digits, but it cannot start with a digit
N/A