User guide

BRIDGE Bridge command reference
iMG/RG Software Reference Manual (Switching)
2-44
Example bridge add fwdallinterface shared FDB_1 bridge1
See also BRIDGE DELETE FWDALLINTERFACE SHARED
BRIDGE LIST FWDALL SHARED
2.3.4.1.2 BRIDGE ADD FWDUNREGINTERFACE SHARED
Syntax
BRIDGE ADD FWDUNREGINTERFACE SHARED { <fdbname> | <fdbnumber> }
<interfacename>
Description This command adds an interface to the egress interface list of the Forward Unregistered
Group of the named Forwarding Database. The Forward Unregistered Group represents the set
of interfaces to which all the multicast frames would be forwarded whose respective destination
MAC addresses have no other forwarding information available..
Options
T he following table gives the range of values for each option that can be specified with
this command and a default value (if applicable)
fdbnumber A number that identifies an existing Forwarding Data-
base. To display the list of FDBs, use the
bridge list
fdbs command. The number appears in the first col-
umn under the heading ID.
N/A
interface name The name of a bridge interface that has previously
been added and attached to a transport using the
bridge add interface and bridge attach
N/A
Option Description Default Value
fdbname The name of an existing Forwarding Database. See
bridge add vlan CLI command to configure a new
Forwarding Database.
fdbnumber A number that identifies an existing Forwarding
Database. To display the list of FDBs, use the bridge
list fdbs command. The number appears in the first
column under the heading ID.
interface name The name of a bridge interface that has previously
been added and attached to a transport using the
bridge add interface and bridge attach CLI com-
mands, respectively.
Option Description Default Value