User guide

Switch command reference Switching
2-35
iMG/RG Software Reference Manual (Switching)
Example To d i s p l ay t h e FDB content:
--> switch show fdb
VLAN MAC Port Status
204 00:0d:da:00:79:0f lan8 Dynamic
204 00:0d:da:01:2c:68 lan8 Dynamic
204 00:0d:da:02:33:d2 lan8 Dynamic
204 00:0d:da:05:51:94 lan8 Dynamic
202 00:0d:da:01:2c:68 lan8 Dynamic
202 00:0d:da:06:f4:23 lan8 Dynamic
202 00:0d:da:08:6c:b6 cpu Dynamic
202 00:30:84:ee:40:7e lan8 Dynamic
1 00:30:84:ee:40:80 lan8 Dynamic
2.2.4.1.47 SWITCH SHOW PORT
Syntax SWITCH SHOW PORT <port-name> [COUNTERS]
Description This command displays the status of the selected switch port and eventually the value of
the associated counters.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> switch show port lan6
2.2.4.1.48 SWITCH SHOW QOS
Syntax SWITCH SHOW QOS
port-name The name of the switch port to be that entries are
to be displayed for..
N/A
vlan-id The VLAN Identifier that it is of interest to show all
the FDB entries for.
N/A
Option Description Default Value
portname The name of the switch port to be configured. See
Section 2.3 for a list of possible port names.
N/A
Option Description Default Value