User guide

Switching Switch command reference
iMG/RG Software Reference Manual (Switching)
2-34
Max Ports: 10
Max VLANS: 16
Max Queues: 4
See also SWITCH SHOW PORT
2.2.4.1.45 SWITCH SHOW 802.1P
Syntax SWITCh SHOW 802.1P
Description This command displays the current mapping of the switch egress queues respect the
802.1p priority field value of the tag header of the an incoming tagged frame. Please note
that the four queues are shown in the following way:
• low queue --> .
• med-low queue --> L
• med-high queue --> M
• high queue --> H
Example switch show 802.1p
802.1p Queue Map
------------------------------------------------------------------
PID | 0 1 2 3 4 5 6 7
-----------------
QUEUE | . . . . H H H H
------------------------------------------------------------------
2.2.4.1.46 SWITCH SHOW FDB
Syntax
(A) SWITCH SHOW FDB [ADDRESS <mac-address>|PORT <port-name> | vlan
<vlan-id>
(B) SWITCH SHOW FDB
Description This command displays the whole contents of the Forwarding Database (ordered by
VLAN identifier).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
mac-address The MAC Address of the device that it is of interest
to see the FDB entry for.
N/A