User guide

Switch command reference Switching
2-33
iMG/RG Software Reference Manual (Switching)
2.2.4.1.43 SWITCH SET ROUTING-LIMIT
Syntax SWITCH SET ROUTING-LIMIT <limit>
Description This command set the maximum number of frame per seconds that the layer 2 switch
forward to the Residential Gateway network processor for routing purposes.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
2.2.4.1.44 SWITCH SHOW
Syntax SWITCH SHOW
Description This command shows a summary of the switch parameters:
Example --> switch show
Actual configuration:
Switch MAC: 00:0d:da:08:78:d4
Status: Enabled
Aging Time: Enabled
Age Timer: 304
Learning Status: Enabled
Status summary:
Option Description Default Value
limit It's the traffic maximum rate (frame per seconds)
sent to the network processor. Available values are:
1.0Kfps
1.5Kfps
2.0Kfps
2.5Kfps
3.0Kfps
3.5Kfps
4.0Kfps
4.5Kfps
5.0Kfps
5.5Kfps
6.0Kfps
None
(disable the routing limit)
none