User guide

Switching Switch command reference
iMG/RG Software Reference Manual (Switching)
2-30
2.2.4.1.37 SWITCH SET PORT TRSLIMIT-HIGH
Syntax SWITCH SET PORT <portname> TRSLIMIT-HIGH < trslimit >
Description This command specifies the ingress data rate limit for high priority packets. These limits
apply to all frame types entering on the selected switch port that are high priority.
To show the current port status, use the SWITCH SHOW PORT command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> switch set port lan1 trslimit-high 8Mbps
2.2.4.1.38 SWITCH SET PORT TRSLIMIT-LOW
Syntax SWITCH SET PORT <portname> TRSLIMIT-LOW < trslimit >
Description This command specifies the ingress data rate limit for low priority packets. These limits
apply to all frame types entering on the selected switch port that are low priority.
To show the current port status, use the SWITCH SHOW PORT command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> switch set port lan1 trslimit-low 8Mbps
2.2.4.1.39 SWITCH SET PRIORITY
Syntax SWITCH SET PRIORITY <802.1p_base_priority>
Option Description Default Value
portname he name of the switch port to be configured.
See Section 2.3 for a list of possible port names.
N/A
trslimit The maximum bit rate allowed on a switch port in
the transmit direction. See Section 2.3 for a list of
possible values - depending on product family.
None
Option Description Default Value
portname he name of the switch port to be configured.
See Section 2.3 for a list of possible port names.
N/A
trslimit The maximum bit rate allowed on a switch port in
the transmit direction. See Section 2.3 for a list of
possible values - depending on product family.
None