User guide

Switching Switch command reference
iMG/RG Software Reference Manual (Switching)
2-24
2.2.4.1.26 SWITCH SET PORT FLOW
Syntax SWITCH SET PORT <portname> FLOW { Enabled | Disabled }
Description This command enables/disables full duplex flow control on the selected switch port.
To show the current port status, use the SWITCH SHOW PORT command.
Options The following table gives the range of values for each option which can be specified with
this command and a default value (if applicable).
Example --> switch set port wan flow Enabled
See also SWITCH SHOW PORT
2.2.4.1.27 SWITCH SET PORT FLOWCONTROL
Syntax
SWITCH SET PORT <portname> FLOWCONTROL { Enabled | Disabled }
Description This command enables/disables full duplex flow control on the selected switch port.
To show the current port status, use the SWITCH SHOW PORT command.
Options The following table gives the range of values for each option which can be specified with
this command and a default value (if applicable).
Example --> switch set port wan flowcontrol enabled
See also
See also SWITCH SHOW PORT
Option Description Default Value
port-name The name of the switch port to be configured.
See Section 2.3 for a list of possible port names.
N/A
Enabled | Disabled When Enabled, the flow control support is active.
When Disabled, the flow control support is deac-
tivated.
Enabled
Option Description Default Value
port-name The name of the switch port to be configured.
See Section 2.3 for a list of possible port names.
N/A
Enabled | Disabled When Enabled, the flow control support is active.
When Disabled, the flow control support is deac-
tivated.
Enabled