User guide

Switch command reference Switching
2-23
iMG/RG Software Reference Manual (Switching)
Options The following table gives the range of values for each option which can be specified with
this command and a default value (if applicable).
Example --> switch set port lan1 DSCP Enabled
2.2.4.1.25 SWITCH SET PORT DSCP/NODSCP
Syntax SWITCH SET PORT <portname> { dscp | nodscp }
Description This command enable/disable the DSCP based priority on the selected switch port .
When DSCP based priority is enabled, the DSCP value of each incoming frame is search
in the switch DSCP table to check if the frame must be forwarded to High or Low Prior-
ity egress queue. If the switch DSCP table reports that for a specific DSCP value the
frame must be managed as high priority frame, than the switch will forward the frame to
the high priority queue otherwise the frame will be forwarded to the low priority queue.
To change the switch DSCP table use the
SWITCH SET QOS PRIORITY command.
Options The following table gives the range of values for each option which can be specified with
this command and a default value (if applicable).
Example switch set port wan dscp
See also SWITCH SHOW PORT
SWITCH SET QOS PRIORITY
Option Description Default Value
port-name The name of the switch port to be configured.
See Section 2.3 for a list of possible port names.
N/A
Enabled | Disabled When Enabled, the support of DSCP IP field man-
agement is active.
When Disabled, any QoS policy based on DSCP
field is disabled.
Disabled
Option Description Default Value
port-name The name of the switch port to be configured.
See Section 2.3 for a list of possible port names.
N/A
dscp | nodscp When dscp, the support of DSCP IP field manage-
ment is active.
When nodscp, any QoS policy based on DSCP field
is disabled.
nodscp