User guide

Switch command reference Switching
2-13
iMG/RG Software Reference Manual (Switching)
Please see notes under Port management for the applicability of the FLOW and JAM-
MING options.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example switch disable port lan1
See also SWITCH ENABLE PORT
SWITCH SHOW PORT
2.2.4.1.6 SWITCH ENABLE AGEINGTIMER
Syntax SWITCH ENABLE AGEINGTIMER
Description This command restarts the aging timer used by the look up engine to update the aging of
FDB entries.
To show the current switch status, use the SWITCH SHOW command.
Example switch enable ageingtimer
See also SWITCH DISABLE AGEINGTIMER
SWITCH SHOW
2.2.4.1.7 SWITCH ENABLE LEARNING
Syntax SWITCH ENABLE LEARNING
Description This command restarts the learning process used by the look up engine to update the
FDB when frames from new addresses are received.
To show the current switch status, use the SWITCH SHOW command.
Example switch enable learning
See also SWITCH DISABLE LEARNING
SWITCH SHOW
Option Description Default Value
Port-name The name of the switch port to be configured.
See Section 2.3 for a list of possible port names.
N/A