User guide

SNMP MIB
iMG/RG Software Reference Manual (System Configuration)
1-114
1.6.10.2 Standard traps
Only the standard ColdStart TRAP is supported.
Note: Standard ColdStart TRAP can be sent only in SNMPv1 format. It is therefore necessary that the
snmpd.cnf file is correcty configured to generate this trap using the SNMPv1 protocol.
ICMPOUTSRCQUENCHS Read-Only Read-Only
ICMPOUTREDIRECTS Read-Only Read-Only
ICMPOUTECHOS Read-Only Read-Only
ICMPOUTECHOREPS Read-Only Read-Only
ICMPOUTTIMESTAMPS Read-Only Read-Only
ICMPOUTTIMESTAMPREPS Read-Only Read-Only
ICMPOUTADDRMASKS Read-Only Read-Only
ICMPOUTADDRMASKREPS Read-Only Read-Only
TCPRTOALGORITHM Read-Only Read-Only
TCPRTOMIN Read-Only Read-Only
TCPRTOMAX
TCPMAXCONN
TCPACTIVEOPENS
TCPPASSIVEOPENS
TCPATTEMPTFAILS
TCPESTABRESETS
TCPCURRESTAB
TCPINSEGS
TCPOUTSEGS
TCPRETRANSSEGS
TCPCONNSTATE Read-Write Read-Only
OID RFC1213 Implementation