User guide

SNMP MIB
iMG/RG Software Reference Manual (System Configuration)
1-110
snmpTargetAddrEntry myV2cManager_allRequests snmpUDPDomain
192.147.142.35:0 0 0 whereValidRequestsOriginate -nonVolatile
255.255.255.255:0 2048
To send SNMPv2c Trap messages to exactly one SNMP manager station:
vacmAccessEntry myV2cGroup -snmpv2c noAuthNoPriv exact All All All
nonVolatile
vacmSecurityToGroupEntry snmpv2c targetV2cCommunity myV2cGroup non-
Volatile
vacmViewTreeFamilyEntry All iso -included nonVolatile
snmpNotifyEntry myTrap whereMyNotificationsGo trap nonVolatile
snmpTargetAddrEntry myV2cManager_allNotifications snmpUDPDomain
192.147.142.35:0 100 3 whereMyNotificationsGo myV2cExampleParams non-
Volatile 1.2.3.4:0 2048
snmpTargetParamsEntry myV2cExampleParams 1 snmpv2c targetV2cCommunity
noAuthNoPriv nonVolatile
1.6.10 MIB
Beginning with software release 2-0-0, the AT-RG600 Series supports SNMP v1, v2c and v3 for configuration
commands. Notification messages are restricted to SNMP v1.
1.6.10.1 Standard (public) MIB
The gateway supports the standard MIB defined in RFC 1213 (RFC1213-MIB) with the following limitations:
[report here a table that details which public objects are supported by each family]
OID RFC1213 Implementation
SYSDESCR Read-Only Read-Only
SYSOBJECTID Read-Only Read-Only
SYSUPTIME Read-Only Read-Only
SYSCONTACT Read-Write Read-Write
SYSNAME Read-Write Read-Write
SYSLOCATION Read-Write Read-Write
SYSSERVICES Read-Only Read-Only
IFDESCR Read-Only Read-Only
IFTYPE Read-Only Read-Only