User guide

ZTC ZTC command reference
iMG/RG Software Reference Manual (System Configuration)
1-82
Example --> ztcclient enable dynamic listeninterface ip0
See also ZTCCLIENT DISABLE
1.5.3.1.2 ZTCCLIENT ENABLE STATIC
Syntax ZTCCLIENT ENABLE STATIC ZTCSERVERADDR <ztcserveraddr>
Description This command enables the ztcclient, and set the ZTC Server IP address.
To apply changes to the ZTC client module and turn on it, use the ZTCCLIENT
UPDATE command.
Options The following table gives the range of values for each option that can be specified with
this command, and a default value (if applicable).
Example --> ztcclient enable static ztcserveraddr 192.168.102.3
See also ZTCCLIENT DISABLE
1.5.3.1.3 ZTCCLIENT DISABLE
Syntax ZTCCLIENT DISABLE
Description This command disables the ztcclient module.
Example --> ztcclient disable
See also ZTCCLIENT ENABLE
Option Description Default Value
IPINTERFACE The name of an existing IP interface.To see the
list of existing interfaces, use the IP LIST INTER-
FACE command.
N/A
Option Description Default Value
ZTCSERVERADDR The IP address of the interface used to connect to
the ZTC Server. The IP address must be specified
in IPv4 format (e.g. 192.168.102.3)
N/A