User guide

SwUpdate command reference Software update
1-69
iMG/RG Software Reference Manual (System Configuration)
TABLE 1-4 SwUpdate Commands
1.4.4.1.1 SWUPDATE MAC
Syntax SWUPDATE MAC {ENABLE | DISABLE}
Description This command forces the SwUpdate module to look for the MD5SUM file on the FTP
server into a directory having the same value as the unit MAC address.
The working directory is therefore the home directory followed by the unit MAC
address.
If the path value is set using SWUPDATE SET PATH command, the working directory is
the user home directory + the MAC address + the path.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Option
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
SWUPDATE MAC
XXXXX X X X X
SWUPDATE SET LOGIN
XXXXX X X X X
SWUPDATE SET PASSWORD
XXXXX X X X X
SWUPDATE SET PATH
XXXXX X X X X
SWUPDATE SET RETRY PERIOD
XXXXX X X X X
SWUPDATE SET SERVER
XXXXX X X X X
SWUPDATE SHOW
XXXXX X X X X
SWUPDATE START
XXXXX X X X X
SWUPDATE START TIME
XXXXX X X X X
SWUPDATE STOP
XXXXX X X X X
SWUPDATE STOP TIME
XXXXX X X X X
Option Description Default Value
ENABLED Enable the use of MAC address as qualifier for the
working directory. The name of the working direc-
tory will be for example:00_20_30_40_50_60
Enabled