User guide

Software update SwUpdate command reference
iMG/RG Software Reference Manual (System Configuration)
1-68
This feature is useful when network administrators need to create specific configuration for each residential
gateway.
To enable this feature a special flag named MAC can be used.
For example if the home directory is:
/home/manager
and the gateway MAC address is:
10:20:30:40:50:60
enabling the MAC field, the working directory will be:
/home/manager/10_20_30_40_50_60
If both the path field and the MAC flag are set, the working directory will be the login home directory plus the
path string plus MAC address.
For example if the home directory is:
/home/manager
and the gateway MAC address is:
10:20:30:40:50:60
and the gateway path address is set to:
at-iMG616BD-software-xxx
the working directory will be:
/home/manager/at-iMG616BD-software-xxx/10_20_30_40_50_60
1.4.4 SwUpdate command reference
This section describes the commands available on the gateway to configure and manage the SwUpdate module.
1.4.4.1 SwUpdate commands
The table below lists the SwUpdate commands provided by the CLI: