User guide

Data Collection Screen Overview
AlliedView NMS Administration Guide (Setting Up Performance Management)
8-2
Use the following table to locate the task you wish to perform. Use the screen or form name to locate the relevant section.
8.2 Data Collection Screen
8.2.1 Overview
You can view the list of statistics associated with each of the ManagedObjects discovered in the network via the Configured
Collection panel.
Note: A Managed Object (MO) represents a network element for which data has to be collected. It can be a node,
interface, a port, a card, a slot, etc.
8.2.2 Screen Components for Statistics
To access the Data Collection screen, perform the following:
1. Select Configured Collection node from the tree in the left frame. You can see the Configured Collection panel in the right
frame, which displays a list of nodes under the Hosts column. This list indicates that these ManagedObjects have been
identified in the network for data collection.
2. Select any of the hosts, and you will see the associated Statistic. (Each row of information is called a Statistic). Refer to the
following figure.
FIGURE 8-1 Collection View Panel
TABLE 8-1 Task List for Performance Monitoring
Task Screen / Form Name (if Applicable) Section
Data Collection Screen Configured Collection (8.2.2)
Data Collection (Statistics)
- Overview
- Create Polling Filters
- Create Statistic
Create, Modify, Delete
DataCollection Detailed Properties
(8.3.1)
(8.3.2)
(8.3.3)
Thresholds
- Overview
- Configure Thresholds
- Associate Threshold with Statistic
Threshold Properties
Threshold Properties
(8.4.1)
(8.4.2)
(8.4.3)