User guide

System Power Management System Power Management
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7-244
7.15 System Power Management
This feature allows the user to modify power management for the device. When enabled at the device level, specified ports
immediately shut down, usually so that services such as lifeline POTS can continue as long as possible on battery backup.
When disabled, battery power traps are not sent from the device and port-based power management settings will have no effect.
The table below shows iMG devices running 3.8 indicating which types support the ability to configure system power manage-
ment or whether the device can display port state for LAN and voice ports.
7.15.1 System Power Management
Enabling the feature at the device level is done with the:
• RG General Profile. - Note that the default when creating the profile is Enabled.
• Service Management Form - iMG/RG -> Mgmt Info. (There is also a read-only field that shows the power system status.
Refer to the following figures.
TABLE 7-36 iMG/RG Power Management Feature and Port State Support
Device Type
System
Power
Mgmt
LAN Port
Power
Mgmt
LAN Port
State
TEL Ports
Power
Mgmt
TEL Ports
State
RG613-BD/LH Y
iMG613-RF Y
RG656-BD YYYYY
iMG606-BD/LH/SH YYYYY
iMG606-BD-R2 YYYYY
iMG646-BD/LH/SH YYYYY
iMG646-BD-ON/PX-ON YYYYY
iMG616-BD/LH/SH Y
iMG616-BD-R2 Y
iMG616-RF/RF+ Y
iMG616-SRF+ Y
iMG616-W YYYYY
iMG626-MOD YYYYY
iMG646-MOD YYYYY
iMG726-MOD YYYYY
iMG746-MOD YYYYY
iMG726-BD-ON YYYYY
iMG624-A Y
iMG634-A Y
iMG624-A-R2
iMG634-A-R2
iMG634-B-R2
iMG634-WA-R2
iMG634-WB-R2
iBG915-FX