User guide

iMG/RG Diagnostic Features iMG GR909 Diagnostics
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7-240
• Port State
These are polled from the device and updated approximately every 30 seconds while the tab is displayed.
Each line has an internal and external test results field. When a row is selected, the last diagnostic results are displayed in the
details panels. The Test check box selects lines that the buttons will perform actions against. All lines may be checked at once,
using the “All” check box, and an operation such as Disable will attempt to disable all lines.
Note: Note: Testing all interfaces at once will increase the duration of the test and will interrupt CPE voice service.
Since diagnosing voice lines can interrupt service, there is the following user confirmation:
FIGURE 7-206 Warning when Diagnosing VOIP Lines
The results of tests are displayed in the details panels, as shown in the following figure.
FIGURE 7-207 GR909 Test Results