User guide

Deprovision the iMG and Re-provision with the ADSL UplinkProvisioning an iMG/RG with the LAN4 Feature
7-235
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7.12.6 Deprovision the iMG and Re-provision with the ADSL Uplink
In this procedure, the iMG that currently uses LAN4 for the uplink is de-provisioned and then re-provisioned using the
ADSL port as the uplink.
7.12.6.1 Deprovision the iMG with the LAN4 Uplink
1. Right click on the iMG and select De-provision Customer iMG/RG. Select all of the options, as shown in the following
figure.
FIGURE 7-199 Deprovision iMG - Reset to Factory Defaults
2. Note in the iMG/RG list that the device has all of the profiles dropped and the IP address is appended with _OLD, since
the IP address is now released. Refer to the following figure.
FIGURE 7-200 iMG De provisioned