User guide

Service Management GUI Provisioning an iMG/RG with the LAN4 Feature
7-227
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
FIGURE 7-188 RG General Profile - Port 4 has Management Option
Also note that once “Management” is selected for a Port in the Create Profile wizard, the Admin State of the node is auto-
matically set to “Enabled” and the user is not allowed to set it to “Disabled” as long as the service is set to “Management”.
Refer to the following figure.
u
FIGURE 7-189 Port 4 selected for Management - Admin set to Enabled
7.12.3 Service Management GUI
Once the RG is discovered and configured by the NMS, the “Management” service is not used by the system. Once the NMS
has discovered the node is managed via LAN 4 it no longer allows the customer to change the port 4 service in the View/
Modify wizard. This is accomplished by removing the Port 4 entry in the “Port Assignments” table of the iMG/RG., as
shown in the following figure.