User guide

Configuring multi-service VLAN Installation Procedures
7-203
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7.10.13 Configuring multi-service VLAN
For a description of a multi-service VLAN model, refer to 7.6.7. This subsection gives procedures that involve creating three
possible configurations. For all of the procedures the following apply:
• The port configuration for each IMG is the same (two voice, two video, one data). This allows the same General profile
to be used for all configurations, even if the type of iMG (EPON, FX, ADSL) is different.
• The VLANs involved should have already been created.
• The port Profile should have already been created, although it is not included here.
7.10.13.1 Creating a Voice and Video/Data VLAN (Configuration 1)
In this configuration, the Voice VLAN is on a separate VLAN, but video and data share a single VLAN. Refer to the follow-
ing figure and notes in 7.10.13 before performing the procedure.
FIGURE 7-159 Multi-service (Video, Data) VLAN - Configuration 1
1. Create the appropriate iMG profiles. Refer to the following table and figures.
TABLE 7-30 iMG Forms for Voice, Video/Data VLAN Configuration
Form Name Attributes Reference
General iMG_one_data_two_video Figure 7-160 - Mgmt. Info
Figure 7-161 - Port Assignment
Internet iMG_data_shared_VLAN_vidoe Figure 7-162
Video iMG_video_shared_data Figure 7-163
= voice VLAN (VID 10)
Video
(IP 1)
Internet
(IP 2)
NMS
(IP 3)
= shared (video, data) VLAN (VID 40)
XE/GE NM card
SFP
= 172.16.33.18
= IP Subnet
Customer
= 10.56.7.225
POTS
Video to
Set Top Box
Video to
Set Top Box
FXS
10
Data to PC
Data to PC
Data to PC
Video to
Set Top Box
Video to
Set Top Box
Video to
Set Top Box
iMG646PX-ON
= 10.56.7.223
ONU 4.0.0
ETH 4.0.0
iMG646
iMG634
EPON
40
BD Fiber
10
IP
Gateway
Class 5
Switch
Ethernet
Ethernet
Ethernet
Ethernet
Ethernet
Ethernet
40
= 10.56.7.224
40
Ethernet
Ethernet
FXS FXS
10
Video to
Set Top Box
xDSL xDSL
3_play_Voi ce_Shared
FXS
10
FXS FXS
10
FX
Ethernet
BD Fiber
40