User guide

De-Provision iMG/RG from AlliedView NMS Installation Procedures
7-199
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
3. Select the Customer ID option for the iMG/RGs and Voice Lines only, then click on De-Provision.
4. The RG will reboot.
5. In the iMG/RG table, the Customer ID is deleted and all profile information is deleted. Refer to Figure 7-156.
FIGURE 7-156 iMG/RG Table after Deleting RG
6. Access the device using telnet. Right click on the iMG/RG in the iMG/RG table and select Telnet to Device. Refer to the
following figure.
FIGURE 7-157 Using telnet to Access the RG
7. Login to the iMG/RG.
8. Set back to factory defaults (>sys config set factory)
9. You can now unplug the RG and place it back in its box.
10. Return to the De-Provision Ports Form.
11. This time select the Ports panel.
12. Right click on the iMG/RG and select Delete Object and Traces, as shown in the following figure.