User guide

De-Provision iMG/RG from AlliedView NMS Installation Procedures
7-197
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
FIGURE 7-153 De provision Ports Form
There are three options for deletion:
• iMG/RG - Deletes the Customer ID and all associated profiles. The user can now provision a new Customer ID for the
iMG /RG and build a service set from profiles.
• Ports (iMAP) - De-provisions the iMG/RG, the associated profiles, and the associated ports. If a POTS24 was being used
to provide voice service, the POTS24 port would appear here as well.
• Voice Line - If there is a connection to the GenBand, the attributes associated with it are shown here. If more than one
voice line is being used, all would appear here.
Moreover, choosing these options depends on what the user is trying to do:
• The user wishes to de-provision the RG (put back in the box), and then be able to re-provision the RG on the same
Access Island. In this case, the RG, when taken out of the box and re-provisioned, would be using the same RGMgmt
VLAN.
• The user wishes to de-provision the RG (put back in the box), and then be able to re-provision the RG on a different
Access Island. In this case, the RG, when taken out of he box and re-provisioned, would need to start with the default
(bootstrap) VLAN for DHCP discovery.
• The user has an open access model, and so he strategy depends on whether the same RGMgmt VLAN is used for all
iMG/RGs in the network.
7.10.9.2 De provision the iMG/RG (same Access Island)
To de-provision the iMG/RG, perform the following steps: