User guide

Provisioning Guidelines for Models Provisioning Custom VLANs
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7-164
7.9.8 Provisioning Custom VLANs
Although the RG General Profile is used to define VLANs for specific services, the iMG can support up to 16 VLANs. Each
port can be connected to any VLAN in in any combination of tagged, untagged bridged and routed configurations.
Note: When modular devices (iMG 726, iMG746, etc.) are used, one VLAN is used to manage HPNA and CES.
Therefore, when the HPNA or CES card is provisioned, there is one less VLAN available.
To allow for this, the RG General Profile can support these additional VLANs. Refer to the following figure.
FIGURE 7-126 RG General Profile - Additional VLANs
The Add/Remove button allows the user to create or modify the additional VLANs in iMG. Refer to the following figure.