User guide

Split Management for Wireless iMG Provisioning Guidelines for Models
7-159
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7.9.6.3 Setting up Split Management - Existing CPE
If a device is already provisioned, the feature is by default de-activated. This is shown by accessing the Service Management
form for the iMG and going to the iMG/RG tab, Mgmt. Info subtab, as shown in the following figure.
FIGURE 7-122 Mgmt. Info tab for Existing Wireless Device - Disabled (Default)
To enable this feature, the administrator can do one of the following:
• On the Service Management form, change Split Management to Enabled. Click on Modify to activate the feature.
• Modify the iMG/RG General profile to set Split Management to Enabled and redeploy the profile to the device
Note: It is recommended to modify the iMG/RG General Profile and redeploy the Profile; otherwise you are
changing an attribute that is part of the deployed profile, and so the iMG will show up as out of profile.