User guide

Configuration 3 - Static Provisioning (no DHCP) Datafilling the Triple Play Form - Examples
7-93
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
FIGURE 7-63 Triple Play Form for Static Provisioning
After clicking on Provision, the AlliedView NMS stores all of the values.
If the RG has previously been discovered, the values in the Triple-Play form are applied. If the RG has not been discovered,
discovery can be done in two ways:
• Wait for the 24-hour discovery cycle to discover the RG. The AlliedView NMS will perform an SNMP ping and eventu-
ally ping using the address given to the RG (assuming the AlliedView NMS has discovery set up for the subnet that the
manually given IP address belongs to).
Note: The default Discovery period is 24 hours, assuming there are few enough devices so that in 24 hours all
devices can be discovered. If there are a large number of devices, the period will extend beyond 24
hours.
• Manually add the RG using Add Node, as explained next.
7.6.4.4 Add the RG to the Network
Selecting Edit -> Add Node brings up the Add Node window, as shown in the following figure.