User guide

Discovery Configurator (EE) Node Discovery Tab
AlliedView NMS Administration Guide (File Administration)
3-24
If SNMP discovery is enabled, network discovery will normally use the parameters configured on the SNMP tab, but they can
be overridden for specific networks and subnets by selecting the SNMP option on this tab.The properties to fill in depend on
the SNMP version selected.
A version of SNMP can be chosen to override what is configured for the network. After choosing the SNMP version, selecting
the Properties button allows the parameters to be filled in.
Caution: It is not possible to delete a network from discovery once discovery begins on that network.
Discovery begins any time immediately after saving changes. Therefore, to permanently remove a
network from the discovery configuration, shut down the NMS to shut down the discovery
process and use the standalone Discovery Configurator to delete the unwanted network.
Networks are successfully deleted, however, when deleted before
saving changes.
3.3.6 Node Discovery Tab
FIGURE 3-16 Node Discovery Tab - EE Version
This tab specifies specific nodes to discover (or exclude from discovery).
Nodes can be added, modified, or deleted with the Add, Modify, and Delete buttons.
The “Discover Node” toggle, when checked, means to discover the node. When unchecked, that node will be ignored
(excluded) from discovery.