User guide

Creating RG Profiles with Field Descriptions Business Group ID for SIP
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7-58
7.4.6 Business Group ID for SIP
The concept the Business Group ID for SIP is specific to Lucent and Sonus. To configure this ID, access the iMG/RG -> Voice
Service Tab. If the user chooses the Voip Type as SIP, and then under Advanced VOIP Attributes chooses the iMG/RG Admin.
Profile as Lucent or Sonus and clicks on Done, the New Line Configuration table will now include the Bus. Group ID. Refer to
the following figure.
FIGURE 7-27 Setting the Business Group ID for SIP (Lucent of SONUS)
Note: If there is a SIP Voice Profile for SIP, with type Lucent of Sonus, the user could also choose a Voice Service
Profile that matched (such as Profile SIP_SONUS), and the Bus. Group ID field would appear after
selecting another tab and then re-selecting Voice Service to refresh the page.