User guide

Creating RG Profiles with Field Descriptions Voice Port Profile
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7-56
Advanced Line Attributes When one of the lines is chosen, this button is active, and the window that appears
depends on whether the SIP or MGCP type of profile is being created. Refer to the ATI
Gateway Product Family Software Reference Manual for details on all of these
attributes. Refer to Figure 7-25 for SIP.
The following parameters are for specific features:
• Disable on Power Failure - This controls, when the System power Man-
agement feature is enabled for a device, the voice port will be disabled
when the there is a power failure and the iMG is using a battery. Note that
some of the iMGs with 3-8 do not support this feature. This will also
appear in the Service management window under the Voice Service tab.
Refer to
7.15.
• Fax/Modem Detection - This field will only apply to 3-7 and 3-8 devices
that support this feature. For 3-8 devices the option Enhanced is added,
when software will determine which mode to select. This will also appear
in the Service management window under the Voice Service tab.
• Call Waiting Active Prefix - Two fields are added for setting the prefix to
use to activate and deactivate call waiting. Since call waiting does not
require these prefixes to be set, they are set as a default to ‘None’ and only
used if values (such as *70 to deactivate). This will also appear in the Ser-
vice management window under the Voice Service tab, but only if the ser-
vice is SIP and Call Waiting is enabled.
Note: The attributes already have defaults filled in, and should not be
changed unless for a specific reason. If the user tries to
change these values and these are not allowed, the change
will fail, and the user must look in the console file to review
recent commands to find the failure (webserver: Conflict
failure).
Copy values from profile To create a new profile, the user can select an existing profile, which will fill in the val-
ues from that existing profile. The user can then modify any fields.
Create Activated when a Profile Name has been typed, it creates the profile with the entered
values.
Cancel Closes the window
TABLE 7-14 Create RG Voice Port Profile Form
Attribute Value