User guide

Voice Port Profile Creating RG Profiles with Field Descriptions
7-55
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
iMG/RG Domain The critical component of provisioning voice, this is used in the following ways:
- the domain that is added to the fully qualified domain name for the voice subnet.
Refer to 7.2.6.4.
- When using MGCP and not using a GenBand device, this can have the VoIP end-
point. The value specified must start with a @. Note that this value must match the
endpoint provisioned in the other MGCP device in the configuration.
Note: The NMS supplies the “aaln/<telport number>”at the beginning
of the string, and then the user continues the value with @.
Therefore, values form vendors that do not follow this format
are not supported, such as “$MAC:aaln/0@[$IP]”. Modifying
the end-point syntax is an advanced setting and should not be
used unless required by the MGCP server.
This value can also be changed on the iMG/RG->Voice Service tab of the service man-
agement form. Refer to 7.9.7
MGC or Proxy Server Proxy Server for MGCP or SIP
SIP Location Server Activated when SIP is chosen as the Voip Type
Advanced VOIP Params Sets attributes for RTCP (Control parameters for RTP) or SIP. Also includes the type of
MGCP/SIP to be used in the Profile:
iMG/RG MGCP Profile (for example Genband)
iMG/RG Admin Profile (for example Sonus)
This is where the LCFO option is added. Refer to 7.13.
Line - Enabled Activates the other fields, with defaults of EC=8, Caller ID and Call Fwd=None
EC Echo Cancellation - 0m 8, 16 (default), 32
Caller ID Appears when SIP is chosen as the type of Voip
All Lines Configured Identi-
cally
After choosing one line and its attributes, when the user checks this tic box all other
lines will be enabled and have the same attributes.
TABLE 7-14 Create RG Voice Port Profile Form
Attribute Value