User guide

Creating RG Profiles with Field Descriptions Voice Port Profile
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7-54
FIGURE 7-25 RG Voice Port Profile (SIP)
TABLE 7-14 Create RG Voice Port Profile Form
Attribute Value
Profile Name A descriptive name that should match the service/function provided
The prefix of profile name could include the string that identifies the Access Island as
well as the service potential, such as:
DVLKND-AI01-UpTo4Line
Note: The user would give this name to the profile because it would
have four voice lines filled in; if the user had one voice line
provisioned and needed to provision an additional voice line,
the same profile could be used.
Profile Scoping When used in conjunction with the Triple-Play form, controls the profiles available
after selecting the device.port, or controls the device.port available after selecting the
Profile.
VOIP Type The protocol/server configuration to provide VOIP service:
MGCP
SIP
Note: The only options are MGCP or SIP; specific types for each are
selected in the Advanced VOIP Attributes panel.
Include Voice VLAN in Profile The value entered here depends on the network model:
False - The Access Island model is used, and the Voice VLAN Id field is blank.
True - The Open Access model is used, and the Voice VLAN Id field is activated.
iMG/RG Voice VLAN Id The VLAN that supports voice service.
If the ‘Include Voice VLAN in Profile’ is set to True, this field is activated.
Use DHCP to obtain WAN IP
Address
Use DHCP to obtain the network side address for the RG. This is the default, since this
makes administration easier