User guide

Creating RG Profiles with Field Descriptions RG Internet Profile
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7-50
Reserved Mappings Used to map a Global Pool IP address to an internal host. The port numbers for tcp/
udp are mapped as well, with a one-to-one mapping of port number ranges.
Global IP Address - A member of a Global Pool - The value MAIN means use the IP
address assigned to the IP Interface.
Internal IP Address - The IP address of one of the local hosts
Type - The protocol being used.
Note: Only when tcp or udp is chosen are the port fields activated.
Port - The starting port in the port range for the global member
End Port - The end port in the port range for the global member.
Local Port - The starting port for the internal host. Mapping is done on a one-to-one
based on the local port. For example, if the Port and End Port values are 10 and 20,
and the Local Port is 30, the local port will map 30 to 40 (11 ports)
Copy values from profile To create a new profile, the user can select an existing profile, which will fill in the
values from that existing profile. The user can then modify any fields.
Create Activated when a Profile Name has been typed, it creates the profile with the entered
values.
Cancel Closes the window
TABLE 7-12 Create RG Internet Profile NAT Tab
Attribute Value