User guide

RG Internet Profile Creating RG Profiles with Field Descriptions
7-39
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
TABLE 7-9 Create RG Internet Port Profile Form
Attribute Value
Profile Name A descriptive name that should match the service/function provided.
Note: Profiles that use the Access Island (AI) concept have the
‘Include Internet VLAN in Profile’ set to False. For the Open
Access (OA) model, the field is set to True and a VLAN
number can be entered in the ‘iMG/RG Internet VLAN ID’
field (2..4094)
Example Names:
• BasicHomeInetAI (Security, and therefore Firewall and NAT disabled)
• BasicHomeInetOA (same as above but includes internet VLAN ID)
• BusinessInetAI (Security and Firewall are Enabled but any attributes
datafilled are not included as part of the Profile)
• BusinessInetOA (same as above but includes internet VLAN ID)
• BusinessStatic (Routed Service)
• HomeNetworkingAI (Security, Firewall, and NAT are Enabled and any
attributes datafilled are included as part of the Profile)
• HomeNetworkingOA (same as above but includes internet VLAN ID)
• Bridged Int Srv (Bridged Service)
Internet Service Type Bridged Service
Routed Service
Include Internet VLAN in Pro-
file
The value entered here depends on the network model:
False - The Access Island model is used, and the Internet VLAN Id field is blank.
True - The Open Access model is used, and the Internet VLAN Id field is activated.
iMG/RG Internet VLAN Id The VLAN that supports internet service.
If the ‘Include Internet VLAN in Profile’ is set to True, this field is activated.
Use PPPoE Determines if the PPPoE protocol is to be used to establish the connection between
the iMG and the ISP. With the PPPoE protocol, the iMG will broadcast a Discovery
Initiation packet over the network VLAN, and through negotiation the PPPoE server
will determine each other’s MAC address and Session ID, which together define the
one-to-one connection. Therefore, when this fields is set to True, the Use DHCP to
obtain WAN IP Address is deactivated.
iMG/RG Local Customer
VLAN Id
VLAN that is local to the RG only
Use DHCP to Obtain WAN IP
Address
If True, use DHCP Discovery to obtain the network-side IP address for the RG. If
False, static IP provisioning and IP/masks must be manually entered.
DNS Servers DNS servers associated with the DHCP discovery
Local IP address The IP address of the iMG/RG for the LAN that it services.
Note: This and the remaining fields are activated only when NAT is
enabled on the NAT tab.
Local Mask The masking for the local IP addresses. Usually this is 255.255.255.0 so that the
local addresses can range from 1 to 255.