User guide

General Profile Creating RG Profiles with Field Descriptions
7-35
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
FIGURE 7-15 RG General Profile - IP Routes Tab
Create Activated when a Profile Name has been typed, it creates the profile with the entered
values.
Cancel Closes the window
TABLE 7-8 Create RG General Port Profile Form - IP Routes Tab
Attribute Value
IP Route IP Routes that are available for the RG
The user should always create a route to the “back office” management subnets.
(The AlliedView has one as well that is unavailable to the user.)
Enabled Activates the other IP Route Fields
Subnet Subnet address
Mask Mask over the subnet address, usually 255.255.255.0
Gateway IP address for the Gateway server
Copy value from Profile To create a new profile, the user can select an existing profile, which will fill in the val-
ues from that existing profile. The user can then modify any fields.
TABLE 7-7 Create RG General Port Profile Form - Port Assignment Tab
Attribute Value