User guide

Overview Feature List for Release 12 (up through SP1)
AlliedView NMS Administration Guide (Provisioning the iMG/RG)
7-2
TABLE 7-2 Summary of iMG/RG Release Features in Release 12
Feature Description GUI to Access / Reference
HPNA Testing This applies to the iMG6x6MOD and the iMG7x6MOD Refer to 7.9.3
iBG915-FX (8-VoIP
lines and 5 LAN
ports)
Provides same provisioning features as other iMG/RG devices. Refer to 7.9.4
(Shows added VoIP lines
and LAN port.)
Manage the iMG/
RG via its Ethernet
lan4 interface
For ADSL iMG624/34 family devices, allows the LAN4 port to
replace the WAN port as the network uplink.
This feature is available on iMG/RG 624/34 family devices start-
ing with the 3-7 release.
Refer to 7.12.
Support for LCFO
for iMG VoIP sub-
scribers.
LCFO applies to release 3-7 for certain iMG/RG devices.
The NMS supports setting LCFO for both MGCP and SIP VoIP
types.
Refer to 7.13.
Port-based rate lim-
iting
Starting with the 3-7 release and the types of iMGs/RGs
available, there are different ranges for port-based rate lim-
iting
Refer to 7.17.
Enable or disable
daylight saving on
iMG devices
A field is added to enable or disable daylight saving on iMG/RG
devices is add to the iMG/RG general profile and also on View/
Modify Details on the iMG/RGs.
This feature is supported on iMG/RG releases 3.7 and above.
RG General Profile
Refer to 7.4.2.
Support of
iMG7x6MOD with
1GWAN or
1GWAN/LAN card.
The iMG7x6MOD has the same features and provisioning as the
iMG6x6MOD, with the addition of the 1G WAN and 1G WAN/
LAN card
Note: When the 1G WAN or 1G WAN/LAN card is provi-
sioned, the GE port must be configured with an Inter-
face=Customer. Usually this is a GE8 configured on the
iMAP. As a result, the provisioning of GUIs/process has
changed to set the GE port with a direction of ‘Customer’
Refer to Section 7.9.5.
Split Management
for wireless iMG
When split management is enabled, allows customer to
access device at ATI website to modify certain provision-
ing fields, for these wireless devices.
• iMG634WA/B
• iMG634WA/B-R2
• iMG616W
Refer to Section 7.9.6.
CPU-based rate lim-
iting
Rate limiting can be controlled on a device (CPU) basis.
This is available for:
• iMG MOD devices
• iBG915X
• iMG6x4-R2
• iMG616W
RG Internet Profile
Refer to Section 7.4.3
Comtrend Bonded
Support
Support of the Comtrend 5631 Refer to Section 5.7.6